The OIL FILTER Answer
PurePower duplex screen lifetime oil filters with NO bypass for the replacement of:
HP-1 Ford/Chrysler style (3/4 x 16 thread)
HP-4 Chevrolet/GM style (13/16 x 16 thread)
HP-6 Racing style (1-1/2 x 12 thread)
AC/Purolator style (1-1/2 x 16 thread)
& Remote mount units

This oil filter traps 98% of particles down to less than 30 microns with a unique duplex woven 45 micron T304 stainless steel deep pleated screen, while flowing 4 to 5 times the oil of any paper filter, with a lower pressure drop.  It is lightweight, beautifully machined from 6061T6 billet aluminum, and easily disassembled for engine inspection and cleaning.   Models with full bypass are also available.

Available now in 3.58, 3.79, and 4.00 inch strokes of
DuraTough heat treated 4340 AMERICAN steel forgings with:
**full .125 inch radius fillets**
**2.100 inch rod journals**
**MOPAR and Chevy flange bolt patterns**
**light weight -- approx. 50 lbs.**

Mahle Pistons & Moly Rings

Mahle's pistons for small block Mopars feature
ultra-light forgings, ultra-flat ring grooves, phosphate and grafal coatings
1.5, 1.5, 3.0 mm ring package
1.250 compression height for RAM stroker kits in
4.0, 4.02, 4.03, 4.04, 4.07, 4.08, and 4.100
~~ All on the shelf now, with custom orders welcome at 1-866-676-6727! ~~

CompStar Rods

**4340 fully machined steel forgings**
**strength enhanced fastener gussets**
**large outboard mating facing contact area**
**heat treated and shot-peened ARP 2000 bolts**
**center lengths up to 6.5**

Groden Billet Aluminum Rods

**unsurpassed quality control and craftsmanship**
**most concentric rod to cap alignment available**
**center to center length within .0002**
**30% stronger than any other aluminum rod**

Call 866-676-6727 for yours!

Click here to return to MOPARMecca's Specials